LJSCLM CNC Automatic Glass Cutting Machine and Horizontal Washing Machine
LJSCLM CNC Automatic Glass Cutting Machine glass cutting Line is composed of three parts: automatic intelligent tablet feeder, cutting machine and air float tablet. CNC automatically controls the operation of the whole line, the tablet machine automatically takes the glass down and transmits it to the cutting machine. The cutting machine automatically cuts the input glass size, and automatically transfers the cut glass to the airbreaking and floating tables. The manual assistance is used to divide the glass, and the single glass cutting process is finished.Reliable,
stable performance, strong applicability and high efficiency.
LJSCLM CNC Glass Cutting Machine
technical parameter
| cutting precision | ≤±0.30mm |
| max.cutting size | 3660×2750mm |
| min.cutting size | 100×100mm |
| glass thickness | 3~19mm |
| cutting speed | max100m/min |
| working table height | 930±25mm |
| cutting table height | 4710×3250×930mm |
| cutting table dimension | 1500kg |
| loading table transport speed | 40m/min |
| loading table tilting speed | 7m/min |
| loading table forward distance | 1000mm |
| loading table max.absorb size | 3660×2750mm |
| loading table min.absorb size | 1800×1800mm |
| loading table dimension (odd station) | 6000×3900×930mm |
| max. thickness of glass packing | 800mm |
| min.glass nog height | 240mm |
| breaking table dimension | 4200×3000×930mm |
| air cushion motor power | 5.5kw |
| air pressure | 0.5--0.8Mpa |
| power supply | AC380V 50Hz |
| total power | 18.5KW |
Horizontal Glass Washing and Drying Machine for All Kinds of Glass LJWBQJ2500
Horizontal glass washing machine used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and outgoing segment.
| Max washing Glass | 2500mm(2650mm) |
| Power supply | 380V 50Hz |
| Dimension(L*W*H) | 6260*4800*3100 |
| Weight | 3940kg |
| Glass thinkness | 3-25mm
|
- 1.Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency；
- 2. The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder
- 3. The shaft of rubber roller is made of stainless steel
- 4. The washing part in contact with water is made of stainless steel
- 5. Cleaning department, wind staff overall lift, the maximum lift: 350mm,easy to clean and maintain
- 6. Three pairs of brush(Ø150mm)Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface)；
- 7. Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)；
