Jinan Lijiang Automation Equipment Co., Ltd.
GLOBAL EXPERT IN GLASS PROCESSING SOLUTIONS.
Add to Cart
Automatic Aluminum Spacer Glass Bending Equipment For Glass Processing
Production Overview of aluminum alu-spacer bending machine
Automatic Spacer bending machine can make a variety of convex polygonal aluminum frames by one aluminum strip in one time, thus strengthening the strength of the aluminum frame, making the sealing effect of the insulating glass more better.Double glazing glass is made by 2pcs or more float glasses which filled with desiccant of Argon gas with Aluminum frame.Primary seal(butyl)between insulating glass and Aliminum frame, secondry seal(polysulfide or structure). Insulating glass will be effectively protect radiation when coated Low-E film.Automatic Aluminum spacer bending machine is a special equipment for making aluminum frames of insulating glass, which replaces the traditional fabrication technology.
Main feature of Automatic Aluminum Spacer Bending Machine
●Automatic Spacer bending machine adopt the servo control feeding system, spacer frame size can be adjusted with an
accuracy of 0.1 mm/m
● CNC bending angle control system with adjustable accuracyof 0.1°
●No material prompt, sleep prompt, fault prompt, work prompt,unreasonable data
refuse processing and prompt Support arc-shaped aluminum frame and special. shaped aluminum frame bending
●Set up four groups of spacers storage units
●Automatically adjust the bending speed according to the size of the aluminum frame
to avoid the deformation of the large frame and ensure the high speed and continuity of the small frame
●Aluminum bar with multiple sizes can be selected at will
●Automatic continuous connection of spacer, cutting spacer,avoldance of spacer bar joint
● USB function, which can read excel directly
● Connect with ERP (optional)
Technical parameter of Aluminum spacer bending machine
| Max. bending size
| 1800mm*2000mm(in once)/2500*4000(in twice) |
| Min. bending size
| 150mm*300mm |
| Aluminum spacer width
| 5.5-26..5mm |
| Spacers racks | 4 Racks |
| Spacer size error
| ±0.5mm |
| Angle error
| ±1° |
| Processing speed
| < 25s (1000mm*1000mm) |
| Air supply
| ≥0.65MPa |
| Voltage | 380V50Hz 3P |
| Total power | 2.5KW |
| Dimension | 10500mm*2200mm*2600mm |
Detail of Automatic spacer bending machine
1.German siemens plc control system,touch screen interface.Siemens 1200PLC control system with fast working speed.
2.Automaticlly cut and feed Aluminum spacers
3.Automatic Aluminum spacer bending machine have Four or Twelve different spacer size storage units can choose
4. Aluminum spacers are available in different specifications and in sizes of 5.5-26.5mm
5.Heavy duty connectors ,convenience and safety for installation and debugging
6.Support continuous bending , it automatically avoid spacer -connection while bending and cutting
7.Spare parts of all machine have ID codes.
8.The special machine hand device is used to bend big spacer frame
9.Automatic spacer bending machine can bend aluminum spacer /technoform /Alupro /swisspacer/ stainless steel /thermix (optional)
10.Precise bending effect, corner error less than 0.1mm.
11.USB input function ,it can read the excel data directly
12.Printing paper label sticker function (Optional),could remove it easily.
Related Product
1.Two pump Sealant-spreading Machine LJST02A
Main feature
• Imported motor system to improve equipment efficiency
• Imported sealant gun,stainless steel mixer
• High pressure protect device
• Anti-back flow control structure
• Mixed rate detector can control the rate of two kinds of glue
Technical data
| Working air pressure | 0.3-0.6MPa |
| Sealant spreading pressure | 15-20MPa |
| Sealant volume | 4L/min |
| Diameter of A/B sealant | 570mm/280mm |
| Sealant spreading air pressure ratio | 50:1 |
| Mixed rate | 6:1-14:1 |
| Air supply | Flow 0.8m3/min |
| Air pressure | ≥0.8MPa |
| Overall dimension | 1100*950*1630mm |
2.Butyl Extruder Machine LJTB 01
Main feature
• PLC control system, touch screen interface
• Automatically identify the width of aluminum bar, the glue nuzzle can be automatic adjust
• The critical part of the hydraulic system using German imports of components to ensure that the plastic evenly full
• Fast preheat, improve work efficiency
• with preheating function
• With exhaust inflatable function, improve the quality of sealing and save time for plastic
• Quickly coating speed,can up to 47m/min
• Saving the amount of glue
Technical data
| Squeeze pressure | 10-18MPa |
| Temperature | 110~140℃ |
| Aluminum spacer width | 5.5-26.5mm |
| Speed | 5-47m/min |
| Diameter of butyl cylinder | 200mm |
| Air supply | 0.4m³/min |
| Air pressure | ≥0.6MPa |
| Total power | 380V, 5.7KW,50HZ |
| Dimension | 2800×700×900mm(L×W×H) |
| weight | 650kg |
3.Butyl Extruder Machine LJTB 03
Main feature
• PLC control system, touch screen interface
• Frequency control system
• Arc frame coating structure
• Imported pneumatic and hydraulic supercharging system
• Automatic centering and clamping structure
• Loading capacity up to 14KG, saving time for feeding glue
• Adopt five steps to control convey
• Preheating function,glue cylinder limit function,alarm system
• Covey and gluing mechanism adopts the latest design
Technical data
| Squeeze pressure | 10-18MPa |
| Temperature | 110~140℃ |
| Aluminum spacer width | 5.5-26.5mm |
| Speed | 0-40m/min |
| Diameter of butyl cylinder | 200mm |
| Air supply | 0.4m³/min |
| Air pressure | ≥0.6MPa |
| Total power | 380V, 5KW,50HZ |
| Dimension | 2600×680×1100mm(L×W×H) |
| weight | 650kg |
4.Smart Vertical Edge Deleting Machine LJCM2545
Main feature
• Two-way glass access
• Automatically measure size
• Automatically distinguish low-e surface
• The head can be rotated 360°
• Safe and full automatic device
• PLC control system, touch screen interface
• Six servos control system
• Edge deletion is adjustable
• Intelligent control system, can recognize batch processing
Technical data
| Max. glass processing size | 2500*4500mm |
| Min. glass processing size | 400*280mm |
| Glass thickness | 3-15mm |
| Diameter of grinding wheel | 200mm |
| Conveyor height | 500mm |
| Edge deleting width | 10-50mm |
| Transmission speed | 1. 29m/min |
| Edge deleting speed | 2-29m/min |
| Abrasive wheel width | 10/12/15mm |
| Glass thickness | 3 - 15mm |
| Grinding wheel speed | 0~3000r/min |
| Total air consumption | 100L/ min |
| Air pressure | ≥0.8MPa |
| Total power | 3P 380V 50Hz 3.35KW |
| Dimension | Dimensions :9700×2500×3400mm |
| Total weight | 3700KG |