Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500 used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and out goingsegment.

Structural characteristics:

Aluminum alloy assembled structure, no scrap concept, permanent use,

high efficiency, energy saving 70% efficiency；

2. The rest of the sheet metal parts are sprayed with advanced mechanical

paint or powder；

3. The rubber roller is made of vulcanized rubber with stainless steel shaft；

4. The washing part in contact with water is made of stainless steel；

5. Cleaning department, wind staff overall lift, the maximum lift: 350mm,easy to clean and maintain；

6. Three pairs of brush(Ø150mm)Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface)；

7. Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)；

8. The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning；

9. Main drive for gear transmission, frequency control, digital display , the rotation of the brush roller in the washing section is driven by independent belts of the upper and lower motors respectively, the frequency conversion adjustment speed is stable, the service life is long, realizes the cleaning high request special glass；

10. Mechanical button control, cleaning machine digital display, easy to operate, easy to operate, easy to maintain；

11. Washing machine water tank outside, convenient water tank cleaning, water change, check, so that the washing machine cleaning effect is cleaner.

12. Optional with PLC control, touch screen display.It is convenient for workers to operate and maintain, and can be connected to all manufacturers of edge grinding machines without gap.(purchase separately if necessary)

Technical parameters:

1. Maximum glass width: 2500mm (effective maximum: 2650mm)

2. Minimum glass specification: 400mm×400mm (limited to single row on left and right sides)

3. Glass thickness: 3mm-25mm (digital display)

4. Speed range: glass thickness within 3-25mm Vmax=1-12m/min

5. Main drive, brush speed regulation method: frequency control

6. Table height :900±25mm

Maximum glass width	2500mm (effective maximum: 2650mm)
Minimum glass specification	400mm×400mm (limited to single row on left and right sides)
Glass thickness	3mm-25mm (digital display)
Speed range	glass thickness within 3-25mm Vmax=1-12m/min
Main drive, brush speed regulation method	frequency control
Table height	900±25mm
Total power	42KW(water-bearing wind heating: 15KW)
Water source	self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer)
Power source	380V 50Hz
Dimensions (length × width × height)	approximately 626048003100mm
Weight	3940kg

 Origin of motor and main accessories:   	 			Main drive motor 			Zhejiang province 		
 			Brush motor 			Zhejiang province 		
 			High pressure air blower 			Guangdong province 		
 			The water pump 			Shanqing 		
 			brush 			Anhui province 		
 			Rubber roller 			Guangdong province 		
 			Frequency converter 			VEICHI/Rexroth 		
 			Electric parts 			Schneider 		
  

►►►Stainless Steel parts showing

►►►The drying section is composed of 2 sets of high-pressure professional air knives.

►►►Glass washer installition in workshop

Related products of LIJIANG GLASS

Vertical Glass Washing And Drying Machine With Soft Brushes And Stainless Steel Material

Main features of the vertical Glass Washing Machine

Wash online and offline low-e glass, automatically recognizes Low - e film
Adopt the independent wind knife system to improve the washing efficiency
The air knife can automatically adjust the width according to glass thickness
Water tank automatic temperature control, water replenishing system
European silencer system & stainless steel drying system
Display washing speed on the screen directly

Horizontal Flat Glass Washing Machine And Vertical Glass Washing Machine

Transfer section of the vertical glass washing and drying machine

1. Low - e glass sensor

This sensor is installed before washing machine.It can automatically recognize Low- e glass, preventing the glass from dropping Low - e surface.

2. Conveyor roller

The transfer : The front and back transfer wheel are all moved, all actively transferred. It can guarantee the big size glass and thick glass pass through smoothly

Washing & drying section of the vertical glass washing machine

1. Materials

The whole washing and drying section adopt stainless steel material, including the plate and interior spare parts,with waterproof accessories.

The thickness plate on the washing machine can up to 4mm and the interior plate can be 8mm.The equipment performance is better and service life is much longer.

2 . 6 pieces of Soft Brushes

It has 6 brushes which are all soft brushes, can wash flat glass, temper glass and low - e glass. It has a diameter of less than 0.1mm bristles, never damage glass, especially for protecting low - e glass.

3. Noise reduction device

The noise can be controlled below 90 decibels by using nylon gear and sponges, our washing machine has the smallest noise decibel.

4. Water heating system

Adopts air heating system, use soft water to wash glass clearly

5. Unique air knife design

Air knife is float design, it always keep the right and suitable distance 3mm between the glass surface and air knife (Same like LISEC structure ) check the following picture. (3mm is the best drying distance)

6. Automatically recognize glass thickness

1) . There is a universal joint device, when the glass thickness was changed, the wind knife will move forward and backward to adjust the distance so that the relative distance between the wind knife and the glass is constant, so as to avoid damage to the glass due to the changes of the glass thickness.

2) . There are chain gears on both sides of the bottom of the glass to actively transfer the glass which can keep a fast speed, not only the large size, small size glass can also be passed quickly .The front and back squeeze wheel are all actively moved and conveyor. No mater the glass size is big or small , it all guarantee the glass pass through smoothly.

Detection section of the vertical glass washing machine

1. Checking lights

Using Energy saving lights to check the glass. Clearly reflects whether the glass is lean and free of impurities.

Technical data

Max.glass size	2000mm2500mm / 2500mm3500mm
Min.glass size	280*450mm
Glass thickness	3-15mm (3 - 30 mm are optional)
Glass washing speed	2-10m/min
Glass conveyor speed	45m/min
Washing brushes	3 pairs of soft brushes
Water supply	Water consumption:0.5t/h conductivity:40μs/cm
Air supply	Flow: 0.8m/min
Air pressure	≥0.8MPa
Total power	3P 380V 50Hz

Product Tags:

Horizontal Flat Glass Washing Machine And Vertical Glass Washing Machine

Insulating Glass Production Line

Insulating Glass Machine

Double Glazing Glass Machine

Vertical Glass Washing Machine

Sealant Extruder

Spacer Bending Machine

Argon Gas Filling Machine

Vacuum Hoist Lifting Systems

Aluminum Cutting Machine

Glass Edge Grinding Machine

Horizontal Glass Washing Machine

CNC Glass Cutting Machine

Insulating Glass Sealing Robot

Vertical Edge Deleting Machine

Butyl Extruder Machine

MANUAL GAS FILLING MACHINE

TWO PUMP SEALANT MACHINE

Sealant spreading machine

Freezer for sealing gun

Molecular sieve filling machine

Aluminum spacing trip cutting machine

9.Full automatic multifunctional glass cutting machine

Low-e glass deletion machine

Glass grinding machine

Cantilever crane

Desiccant filling machine

ROTATED SEALANT SPREADING TABLE

Horizontal Flat Glass Washing Machine And Vertical Glass Washing Machine

Structural characteristics:

Technical parameters:

Origin of motor and main accessories:

Technical data

horizontal glass washing machine

vertical glass washing machine

glass top washing machine

Main drive motor	Zhejiang province
Brush motor	Zhejiang province
High pressure air blower	Guangdong province
The water pump	Shanqing
brush	Anhui province
Rubber roller	Guangdong province
Frequency converter	VEICHI/Rexroth
Electric parts	Schneider