Vertical Glass Washing and Drying Machine For Insulating Glass Processing
1. Use and characteristics of glass washing machine
This machine is a high-efficiency equipment for cleaning flat glass with a thickness of 3-8mm. The whole machine adopts a horizontal structure. The flat glass is placed on the conveying roller, and reaches the discharge section through the feeding section, cleaning section, and drying section. The glass transmission is stable, and the speed can be adjusted by stepless speed regulation motor to meet the requirements of different cleanliness and improve the cleaning effect. The machine is easy to operate, and the operation buttons are concentrated on the operation panel.
2. Technical specifications of vertical glass washing machine
Voltage: 380V Frequency: 50HZ
Total power: 7.27KW Working speed: 0-5m/min
Glass size: (maximum) 1600*2000mm, (minimum) 300*300mm
Glass thickness: 3-8mm

Main feature of glass washing and drying machine

•Using 6 pieces (3 pairs) of soft brushes with 0.1mm soft hair, can wash low-e

glass well

• New air knife uses aluminum profile (Duckbill Air Knife), the size of the air outlet is adjusted by the aluminum profile duck beak. This can reduce the number

of adjusting screws, ensure that each screw is not loose, and avoid the resonance of the air knife.

•The air knife can automatically adjust the width of the air knife according to the thickness

•The operation box with washing speed display, can accurately display washing speed

•Water tank automatic temperature control, water replenishing system

•European silencer system

• Stainless steel material